Mold Removal in the House
Learning about mold
A type of a fungus that which is made up of small organisms called spores is called a mold, which comes in a variety of colors, and when these spores are released into the air and are inhaled may lead to health problems, such as allergies, asthma, red eyes, skin rashes, sneezing, runny nose, shortness of breath; therefore, mold must be eliminated in the house, as they can grow in damp places, such as bathroom, kitchen, laundry room, basement, crawl spaces.
Removal of mold around the house
There is a great tendency for mold growth to develop when there is moisture in the house and when there is already the existence of mold in the house, it’s important to remove the mold and fix the problem of dampness so as not to induce another chance for mold to develop; therefore, here are ways to control the mold growth in the house – use dehumifiers and air-conditioners when the climate is hot and humid to reduce air moisture; make sure that the air conditioning drip pans are always clean, free of obstructions and flow properly; keep the house warm during cold seasons, since moisture is present on cold surfaces, therefore, provide insulation to cold surfaces, like exterior walls, floors, windows; dry wet areas in the house within 24 to 48 hours; fix leaks or seepages; always have regular maintenance checks on the heating and cooling system of the house; open doors between rooms to increase circulation.
Controlling mold growth in the kitchen
The kitchen area is where most of the family members are found to cook or eat, that’s why immediate steps must be conducted to control or eliminate mold growth in this area following these procedures: use exhaust fans to remove the moisture out when cooking; when washing dishes or cleaning, keep the wash area and kitchen area dry; when there is moisture presence on windows, turn off certain appliances near the windows; check for leaks around the kitchen sink, refrigerator ice maker, and other water sources; empty and clean refrigerator drip pans.
Removal of mold in the basement and crawl spaces
Use the following measures to control or eliminate mold growth in the basement and crawl spaces where these are areas that get easily damp – put plastic cover over dirt in crawl spaces to prevent moisture from entering from the ground; see to it that crawl spaces are ventilated using installed vents in outside walls; paint concrete floors or use rugs to cover floors in basements; check for leaks on the basement floors; check on gutters; if the laundry is in the basement, vent the clothes dryer to the outside; check the vent of any obstructions; avoid leaving damp clothes in the laundry basket.
To control or remove mold growth in bathrooms where moisture are more likely to be produced, follow these procedures: use exhaust fans to remove moisture; use area rugs as carpeting on the bathroom floors; check for leaks on tubs and basins; open the window when taking a shower; avoid leaving damp towels on the floor.
Recommended reference: visit here